Disassembly
- Remove the knob caps
- Reinstall the front panel
- Unscrew the front panel screws with a hex screwdriver
- Use another hex screwdriver to remove the back panel screws
- Take off the front panel then pull the board out
Reassembly
- Align the holes and reassemble the board
- Reinstall the front panel
- Put the screw back in and tighten them
- Reinstall the nuts and shrapnel, tighten with pliers
- Turn the knob to the left, then align the knob caps at the 7 o'clock position
- Screw back the rear panel screws
Please refer to the video through the link https://youtu.be/bI4FL_Ill4k
The sizes of the hex screwdrivers are 2.5mm and 2.0mm (such as for BT20A); V3, ZA3, and BT20A PRO use 2.0mm hex screwdrivers.
If you have any questions or concerns, please don't hesitate to contact support@fosiaudio.com.
Comments
0 comments
Please sign in to leave a comment.