BT30D PRO
- I connect to the Pre-Out from the amp to the LFE on the powered Polk PSW110 subwoofer. But there is no sound.
- The differences in terms of BT30D and BT30D PRO’s Sub out and Pre out functionality.
- Power Output with Various PSUs
- What type of DC-plug I need to buy for power supply?
- Can I use different impedances in each part? Like 4ohms in the stereo output and 8ohms in the subwoofer output?
- Only one port on the powered sub.
- What’s the sub frequency position relative to the dial?
- What advantages does the BT30D Pro have over the BT30D?
- I purchased a BT30D pro and I'd like to know the range of subwoofer crossovers frequency.
- I connected the Fosi 3.5mm pre-out to the Klipsch RCA left and/or right speakers, and it caused a considerable buzz from the subwoofer.
- The passive sub does not come on.
- Would it be ok if I used a 36V 10A energy supply?
- Is it ok to use a 24v 10 amp power supply on the BT30D PRO?
- I have an active subwoofer connected through the 3.5 mm pre out. Do the sub freq and sub vol knobs only work with a passive subwoofer connected via the passive subwoofer output on the back?
- Can I use technics turntable with Fosi Audio DT30D Pro?
- Why are there three speaker outs? the subwoofer out is the 3.5mm pre out?